思科SP系列高端路由器都是由引擎RP/线卡（业务卡/LC）/矩阵卡FC（fabric card）等组成，但是只有引擎RP上存在console口，其他的板卡都是没有物理的console线路，所以在排查业务板卡等系列没有物理console线路的板卡启动失败的问题时，往往都只能login设备采集业务板卡的启动log，而往往这些log都很简单，并不能告诉我们这个板卡出了什么问题，那其实我们有内置的console线路，可以让我们能够跳转到其他板卡的console口，查看启动的详细log。方法如下:
CRS
CRS使用的32bit的系统，我们也称之为cXR，而且有且只有32bit 版本的系统，并且最有一个软件版本为6.7.4，后续不会再有软件更新。一般来说CRS的硬件故障很容易从log中识别出来原因，所以下面跳转到板卡console的方式并不常用，了解即可，退出符为CTRL+/
RP/0/RP0/CPU0:CRS-D# run console_tunneling 0/0/cpu0
Thu Jun 23 15:46:27.360 EDT
Trying to connect to node 0/0/CPU0...
Connected to node 0/0/CPU0.
Escape character is '^_'.
Connection to node 0/0/CPU0 closed.
ASR9000
cXR(32 bit)
命令为run attachCon,退出符为detach,即需要敲出这个单词退出console.
RP/0/RSP0/CPU0:ASR-9006-A#run attachCon 0/0/CPU0
Thu Jun 23 15:42:15.600 UTC
attachCon: Starting console session to node 0/0/CPU0
attachCon: To quit console session type 'detach'
attachCon: WARNING - Type only 'detach' in the shell. Do not combine other keys.
TESTING enabling interrupt for uart: mask 0x40, enable 1 reg_val 0x40
Current Baud 115200
Setting Baud to 9600
#
# detach
Terminating console to node 0/0/CPU0..
TESTING enabling interrupt for uart: mask 0x40, enable 0 reg_val 0x0
RP/0/RSP0/CPU0:ASR-9006-A#
RP/0/RSP0/CPU0:ASR-9006-A#run attachCon 0/0/CPU0 115200
Thu Jun 23 15:42:51.083 UTC
attachCon: Starting console session to node 0/0/CPU0
attachCon: To quit console session type 'detach'
attachCon: WARNING - Type only 'detach' in the shell. Do not combine other keys.
TESTING enabling interrupt for uart: mask 0x40, enable 1 reg_val 0x40
Current Baud 115200
Setting Baud to 115200
Terminating console to node 0/0/CPU0..
TESTING enabling interrupt for uart: mask 0x40, enable 0 reg_val 0x0
RP/0/RSP0/CPU0:ASR-9006-A#
eXR(64 bit)
命令为attachCon,CTRL+W 退出
RP/0/RP0/CPU0:ASR-9912-A#admin
sysadmin-vm:0_RP0# run
[sysadmin-vm:0_RP0:~]$
[sysadmin-vm:0_RP0:~]$chvrf 0 bash
[sysadmin-vm:0_RP0:~]$attachCon 0/1
===============================================
==== Connecting to Line Card =====
===============================================
Line Card: No 1
Press <Ctrl-W> to disconnect
Enabling 16550 on UART 1 baud rate 115200
NCS55
sysadmin-vm:0_RP0# run
Thu Jun 23 16:27:28.804 UTC+00:00
[sysadmin-vm:0_RP0:~]$
[sysadmin-vm:0_RP0:~]$
[sysadmin-vm:0_RP0:~]$.attach_console 1
MASTER-RP:Proceding to remote console of Slot: 1
old data: 0 new data: 80010000
Escape character is '^x' [control+x]
host:0_LC0 login:
host:0_LC0 login:
host:0_LC0 login: Exited
[sysadmin-vm:0_RP0:~]$
Or
sysadmin-vm:0_RP0#
sysadmin-vm:0_RP0#
sysadmin-vm:0_RP0# run /opt/cisco/calvados/sbin/rconsole -l 0/SC0
NCS6000
NCS6008:
sysadmin-vm:0_RP0# run
Thu Jun 23 17:35:39.459 UTC
[sysadmin-vm:0_RP0:~]$
[sysadmin-vm:0_RP0:~]$
[sysadmin-vm:0_RP0:~]$
[sysadmin-vm:0_RP0:~]$chvrf 0 /opt/cisco/calvados/sbin/rconsole -l 0/0
Connecting to location 0/0 (backplane-slotid 16, console 0)
Escape sequence is "end"
Cisco 8000
Cisco 8000 上使用的是rconsole, slot 0 代表0/0/cpu0,这个命令无法连接到FC卡。
RP/0/RP0/CPU0:8808-A#run rconsole -s 0
Tue Aug 8 16:43:43.894 UTC
----------------------------------------------------------
8 slot chassis
Target slot # : Logical=0 Physical=2
Target slot board_id status register (0x10BC): 0x2420017a
Source slot # : Logical=0 Physical=30
Source slot board_id status register (0x10BC): 0x22000177
Source slot type : 0x20
Setting up required configs on source slot (RP0) ..
Setting up required configs on target slot (0) ..
----------------------------------------------------------
Launching rconsole to slot 0x2, Use Ctrl-x to quit
ASR9000 eXR LC console log
按ESC可以中断板卡其他,如下为boot菜单的顺序,第一个为XR EOBC BOOT,可以理解为PXE 从主引擎copy image 启动.
Build-in Shell, 选项可以进行一些特殊镜像的引导.
如过不中断板卡启动,板卡会自动选择XR EOBC BOOT,开始从主引擎引导镜像,如下:
板卡执行PXE启动,设置自己的IP地址为127.1.2.2, 改地址为自己host vm一个网口地址;
127.1.1.27 为主引擎Host vm中的一个网口;
板卡会通过该网段去主引擎copy镜像,
------------XR EOBC Boot------------
Brdcm_bringup_active_loop_free_links---efi
Trying LOCAL SC Path ..Enabling port 34 Disabling port 35
Port [23] (0-base, flag:0x00000200): no_lpbk link_up 2.5G full duplex
Port [34] (0-base, flag:0x00000200): no_lpbk link_up 1G full duplex
Port [35] (0-base, flag:0x00000000): no_lpbk link_down 2.5G full duplex
>>Checking Media Presence......
>>Media Present......
>>Start PXE over IPv4.
Station IP address is 127.1.2.2
XR-EOBC get boot file size request
.
Server IP address is 127.1.1.27
NBP filename is ipxe-lc.efi
NBP filesize is 280446 Bytes
>>Checking Media Presence......
>>Media Present......
Downloading NBP file...
Downloading NBP file-Mtftp:
.
Succeed to download NBP file.
PXE Image Name = ipxe-lc.efi
PXE Image Size = 280446 Bytes
------------Cisco Secure Boot: Begin ------------
-----------Cisco Secure Boot: Verifing-----------
Certificate parsing success
Root Certificate found.
Successfully got public key from issuer cert
Image verified successfully. Booting..
------------Cisco Secure Boot: End ------------
iPXE initialising devices...
GBE0 NetBoot Installed
GBE0 NetBoot Installed
Sysconf checksum failed. Using default values
Fail to retrieve boot mode
ok
iPXE 1.0.0+ (a59e9a) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP HTTPS TFTP VLAN EFI ISO9660 NBI Menu
Trying net0...
net0: 00:00:01:02:00:00 using NII on NII-PCI00:14.0 (open)
[Link:down, TX:0 TXE:0 RX:0 RXE:0]
[Link status: Unknown (http://ipxe.org/1a086194)]
Configuring (net0 00:00:01:02:00:00).................. ok
net0: 127.1.2.2/255.255.0.0
net0: fe80::200:1ff:fe02:0/64
Next server: 127.1.1.27
Filename: http://127.1.1.27/ipxe-lc.ipxe.slot26
http://127.1.1.27/ipxe-lc.ipxe.slot26... ok
http://127.1.1.27/system_image.iso... ok
Memory required for image[system_image.iso]: 1739829248, available: 2145112064
Certificate parsing success
Root Certificate found.
Successfully got public key from issuer cert
Image verified sucessfully. Booting...
Booting iso-image@0x3d84c5000(1739829248), bzImage@0x3d8502800(6276814)
Certificate parsing success
Root Certificate found.
Successfully got public key from issuer cert
Image verified successfully. Booting..
**** PASS: secure boot verification of image: bzImage****
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.23-WR7.0.0.2_standard (hetsoi@calcium-99.cisco.com) (gcc version 4.9.1 (Wind River Linux 4.9.1-7) ) #1 SMP Tue Jun 30 22:17:10 PDT 2020
[ 0.000000] Command line: bzImage root=/dev/ram platform=fretta install=/dev/sda boardtype=LC vmtype=hostos prod=1 crashkernel=192M@0 bigphysarea=10M pci=assign-busses noissu pci=hpmemsize=0M,hpiosize=0M console=ttyS1,115200 initrd=initrd.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be0a5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be0a6000-0x00000000bed49fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bed4a000-0x00000000bed59fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bed5a000-0x00000000bf42afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf42b000-0x00000000bf639fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf63a000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000bb3fb017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb3fb018-0x00000000bb40b657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb40b658-0x00000000bb40c017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb40c018-0x00000000bb41c657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb41c658-0x00000000bb41d017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb41d018-0x00000000bb42d657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb42d658-0x00000000bb42e017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb42e018-0x00000000bb43e657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bb43e658-0x00000000be0a5fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000be0a6000-0x00000000bed49fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bed4a000-0x00000000bed59fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000bed5a000-0x00000000bf42afff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000bf42b000-0x00000000bf639fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bf63a000-0x00000000bf7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
No comments
Comments feed for this article