最近测试了下NCS55上面的MVPN，整理一下防止自己忘记了.
- NCS55在MVPN profile上的支持不如ASR9K的种类多，具体哪些profile支持需要参考下NCS55的配置文档
- NCS55由于芯片的特殊性，有些计数器并不是默认打开的，需要一些特殊的配置，如本文的组播流量的统计上。
Profile 14，据说是NCS55上最受欢迎的profile；这里使用如下的拓扑进行测试。
拓扑
参考文章
mVPN Profile 14 on NCS55xx – How to configure + verify control plane and data plane
Multicast Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 7.4.x
Configuration
Header(NCS55A2-2 PE)
!!!!! Basic config, setup the mpls core.
interface Bundle-Ether12001
mtu 9198
ipv4 address 12.0.0.2 255.255.255.0
load-interval 30
!
interface HundredGigE0/0/2/2
bundle id 12001 mode active
load-interval 30
!
interface HundredGigE0/0/2/3
bundle id 12001 mode active
load-interval 30
!
interface Loopback0
ipv4 address 2.2.2.2 255.255.255.255
!
router isis core
is-type level-2-only
net 49.1234.2222.2222.00
log adjacency changes
address-family ipv4 unicast
metric-style wide
!
interface Bundle-Ether12001
point-to-point
address-family ipv4 unicast
!
!
interface Loopback0
passive
address-family ipv4 unicast
!
!
!
!!!!!! Conifg mvpn vrf
vrf mvpn200
address-family ipv4 unicast
import route-target
200:1
!
export route-target
200:1
!
!
!
!!!! enable mvpn address family between PE, enable ipv4 mvpn for vrf
router bgp 100
nsr
bgp router-id 2.2.2.2
bgp graceful-restart
address-family vpnv4 unicast
!
address-family ipv4 mvpn
!
neighbor 1.1.1.1
remote-as 100
update-source Loopback0
address-family vpnv4 unicast
!
address-family ipv4 mvpn
!
!
vrf mvpn200
rd 200:20
address-family ipv4 unicast
label mode per-prefix
redistribute connected
!
address-family ipv4 mvpn
!
!
!
!!!!! create route-policy for rpf check purposes then apply under pim.
route-policy mldp-partitioned-p2mp
set core-tree mldp-partitioned-p2mp
end-policy
!
router pim
vrf mvpn200
address-family ipv4
rpf topology route-policy mldp-partitioned-p2mp
mdt c-multicast-routing bgp
!
interface TenGigE0/0/0/0.200
enable
!
!
!
!
!!!!!! enable partitioned mdt for the vrf and use bgp auto-discovery to discover the PE's participating in the tree
multicast-routing
address-family ipv4
interface Loopback0
enable
!
!
vrf mvpn200
address-family ipv4
mdt source Loopback0
multipath
rate-per-route
interface all enable
accounting per-prefix
bgp auto-discovery mldp
!
mdt partitioned mldp ipv4 p2mp
!
!
!
!!!!!! enable mLDP for core tree signalling
mpls ldp
discovery
targeted-hello interval 10
!
mldp
address-family ipv4
!
!
router-id 2.2.2.2
address-family ipv4
discovery targeted-hello accept
!
interface Bundle-Ether12001
!
!
!!!!! configure source connection.
interface TenGigE0/0/0/0.200
description to R200 (MPVN)
vrf mvpn200
ipv4 address 200.2.2.1 255.255.255.0
encapsulation dot1q 200
!
End (NCS55A2-1 PE)
!!!!! Basic config, setup the mpls core.
interface Bundle-Ether12002
mtu 9198
ipv4 address 12.0.0.1 255.255.255.0
load-interval 30
!
interface HundredGigE0/0/2/2
bundle id 12002 mode active
load-interval 30
!
interface HundredGigE0/0/2/3
bundle id 12002 mode active
load-interval 30
!
!
interface Loopback0
ipv4 address 1.1.1.1 255.255.255.255
!
router isis core
is-type level-2-only
net 49.1234.1111.1111.00
log adjacency changes
address-family ipv4 unicast
metric-style wide
!
interface Bundle-Ether12002
point-to-point
address-family ipv4 unicast
!
!
interface Loopback0
passive
address-family ipv4 unicast
!
!
!!!!!! Conifg mvpn vrf
vrf mvpn200
address-family ipv4 unicast
import route-target
200:1
!
export route-target
200:1
!
!
!
!!!! enable mvpn address family between PE, enable ipv4 mvpn for vrf
router bgp 100
nsr
bgp router-id 1.1.1.1
bgp graceful-restart
address-family vpnv4 unicast
!
address-family ipv4 mvpn
!
neighbor 2.2.2.2
remote-as 100
update-source Loopback0
address-family vpnv4 unicast
!
address-family ipv4 mvpn
!
!
vrf mvpn200
rd 200:10
address-family ipv4 unicast
label mode per-prefix
redistribute connected
!
address-family ipv4 mvpn
!
!
!
!!!!! create route-policy for rpf check purposes then apply under pim.
route-policy mldp-partitioned-p2mp
set core-tree mldp-partitioned-p2mp
end-policy
!
router pim
vrf mvpn200
address-family ipv4
rpf topology route-policy mldp-partitioned-p2mp
mdt c-multicast-routing bgp
!
interface TenGigE0/0/0/0.200
enable
!
!
!
!
!!!!!! enable partitioned mdt for the vrf and use bgp auto-discovery to discover the PE's participating in the tree
multicast-routing
address-family ipv4
interface Loopback0
enable
!
mdt source Loopback0
!
vrf mvpn200
address-family ipv4
mdt source Loopback0
multipath
ssm range ssm-range
rate-per-route
interface all enable
accounting per-prefix
bgp auto-discovery mldp
!
mdt partitioned mldp ipv4 p2mp
!
!
!
!!!!!! enable mLDP for core tree signalling
mpls ldp
discovery
targeted-hello interval 10
!
mldp
address-family ipv4
!
!
router-id 1.1.1.1
address-family ipv4
discovery targeted-hello accept
!
interface Bundle-Ether12002
!
!
!!!!! configure receiver connection.
interface TenGigE0/0/0/0.200
description to R200 (MPVN)
vrf mvpn200
ipv4 address 200.1.1.1 255.255.255.0
load-interval 30
encapsulation dot1q 200
!
Receiver
router igmp
interface TenGigE0/0/0/6.200
join-group 232.0.0.3 200.2.2.2
!
!
!
BGP Signalling
- route type 1 (Intra-AS I-PMSI AD)
- route type 3 (S-PMSI AD)
- route type 7 (Source Tree Join)
三类路由， 下面的输出是在连接接收者的PE采集的，其中Type 7的路由只有在收到下游的<S*G> Join才会产生
RP/0/RP0/CPU0:NC55A2-01#show bgp ipv4 mvpn
Tue Aug 16 12:07:56.080 UTC
BGP router identifier 1.1.1.1, local AS number 100
BGP generic scan interval 60 secs
Non-stop routing is enabled
BGP table state: Active
Table ID: 0x0 RD version: 0
BGP main routing table version 10
BGP NSR Initial initsync version 4 (Reached)
BGP NSR/ISSU Sync-Group versions 0/0
BGP scan interval 60 secs
Status codes: s suppressed, d damped, h history, * valid, > best
i - internal, r RIB-failure, S stalet, N Nexthop-discard
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 200:10 (default for vrf mvpn200)
*> [1][1.1.1.1]/40 0.0.0.0 0 i
*>i[1][2.2.2.2]/40 2.2.2.2 100 0 i
*> [3][0][0.0.0.0][0][0.0.0.0][1.1.1.1]/120
0.0.0.0 0 i
*>i[3][0][0.0.0.0][0][0.0.0.0][2.2.2.2]/120
2.2.2.2 100 0 i
*> [7][200:20][100][32][200.2.2.2][32][232.0.0.3]/184
0.0.0.0 0 i
Route Distinguisher: 200:20
*>i[1][2.2.2.2]/40 2.2.2.2 100 0 i
*>i[3][0][0.0.0.0][0][0.0.0.0][2.2.2.2]/120
2.2.2.2 100 0 i
Processed 7 prefixes, 7 paths
mLDP Signalling
RP/0/RP0/CPU0:NC55A2-02#show mpls mldp bindings
Tue Aug 16 11:35:22.304 UTC
mLDP MPLS Bindings database
LSP-ID: 0x00001 Paths: 2 Flags: Pk
0x00001 P2MP 2.2.2.2 [global-id 1]
Local Label: 24000 Remote: 1048577 Inft: Lmdtmvpn200 RPF-ID: 0 TIDv4/v6: 0xE0000002/0xE0800002
Remote Label: 24007 NH: 12.0.0.1 Inft: Bundle-Ether12001
RP/0/RP0/CPU0:NC55A2-01#show mpls mldp bindings
Tue Aug 16 12:15:10.292 UTC
mLDP MPLS Bindings database
LSP-ID: 0x00001 Paths: 1 Flags: Pk
0x00001 P2MP 1.1.1.1 [global-id 1]
Local Label: 24000 Remote: 1048577 Inft: Lmdtmvpn200 RPF-ID: 0 TIDv4/v6: 0xE0000002/0xE0800002
LSP-ID: 0x00002 Paths: 2 Flags: Pk
0x00002 P2MP 2.2.2.2 [global-id 1]
Local Label: 24007 Active
Remote Label: 1048577 Inft: Lmdtmvpn200 RPF-ID: 3 TIDv4/v6: 0xE0000002/0xE0800002
mrib verify
RP/0/RP0/CPU0:NC55A2-02#show mrib vrf mvpn200 route
Tue Aug 16 11:38:52.980 UTC
IP Multicast Routing Information Base
Entry flags: L - Domain-Local Source, E - External Source to the Domain,
C - Directly-Connected Check, S - Signal, IA - Inherit Accept,
IF - Inherit From, D - Drop, ME - MDT Encap, EID - Encap ID,
MD - MDT Decap, MT - MDT Threshold Crossed, MH - MDT interface handle
CD - Conditional Decap, MPLS - MPLS Decap, EX - Extranet
MoFE - MoFRR Enabled, MoFS - MoFRR State, MoFP - MoFRR Primary
MoFB - MoFRR Backup, RPFID - RPF ID Set, X - VXLAN
Interface flags: F - Forward, A - Accept, IC - Internal Copy,
NS - Negate Signal, DP - Don't Preserve, SP - Signal Present,
II - Internal Interest, ID - Internal Disinterest, LI - Local Interest,
LD - Local Disinterest, DI - Decapsulation Interface
EI - Encapsulation Interface, MI - MDT Interface, LVIF - MPLS Encap,
EX - Extranet, A2 - Secondary Accept, MT - MDT Threshold Crossed,
MA - Data MDT Assigned, LMI - mLDP MDT Interface, TMI - P2MP-TE MDT Interface
IRMI - IR MDT Interface, TRMI - TREE SID MDT Interface, MH - Multihome Interface
(*,224.0.0.0/4) RPF nbr: 200.2.2.1 Flags: L C RPF P
Up: 3d09h
Outgoing Interface List
Decapstunnel0 Flags: NS DI, Up: 3d09h
(*,224.0.0.0/24) Flags: D P
Up: 3d09h
(*,224.0.1.39) Flags: S P
Up: 3d09h
(*,224.0.1.40) Flags: S P
Up: 3d09h
Outgoing Interface List
TenGigE0/0/0/0.200 Flags: II LI, Up: 3d09h
(*,232.0.0.0/8) Flags: D P
Up: 3d09h
(200.2.2.2,232.0.0.3) RPF nbr: 200.2.2.2 Flags: RPF
Up: 3d09h
Incoming Interface List
TenGigE0/0/0/0.200 Flags: A, Up: 3d09h
Outgoing Interface List
Lmdtmvpn200 Flags: F LMI TR, Up: 3d09h
RP/0/RP0/CPU0:NC55A2-01#show mrib vrf mvpn200 route
Tue Aug 16 12:17:52.769 UTC
IP Multicast Routing Information Base
Entry flags: L - Domain-Local Source, E - External Source to the Domain,
C - Directly-Connected Check, S - Signal, IA - Inherit Accept,
IF - Inherit From, D - Drop, ME - MDT Encap, EID - Encap ID,
MD - MDT Decap, MT - MDT Threshold Crossed, MH - MDT interface handle
CD - Conditional Decap, MPLS - MPLS Decap, EX - Extranet
MoFE - MoFRR Enabled, MoFS - MoFRR State, MoFP - MoFRR Primary
MoFB - MoFRR Backup, RPFID - RPF ID Set, X - VXLAN
Interface flags: F - Forward, A - Accept, IC - Internal Copy,
NS - Negate Signal, DP - Don't Preserve, SP - Signal Present,
II - Internal Interest, ID - Internal Disinterest, LI - Local Interest,
LD - Local Disinterest, DI - Decapsulation Interface
EI - Encapsulation Interface, MI - MDT Interface, LVIF - MPLS Encap,
EX - Extranet, A2 - Secondary Accept, MT - MDT Threshold Crossed,
MA - Data MDT Assigned, LMI - mLDP MDT Interface, TMI - P2MP-TE MDT Interface
IRMI - IR MDT Interface, TRMI - TREE SID MDT Interface, MH - Multihome Interface
(*,224.0.0.0/24) Flags: D P
Up: 3d09h
(*,224.0.1.39) Flags: S P
Up: 3d09h
(*,224.0.1.40) Flags: S P
Up: 3d09h
Outgoing Interface List
TenGigE0/0/0/0.200 Flags: II LI, Up: 3d09h
(*,230.0.0.0/24) Flags: D P
Up: 3d09h
(*,232.0.0.0/24) Flags: D P
Up: 3d09h
(200.2.2.2,232.0.0.3) RPF nbr: 2.2.2.2 Flags: RPF
Up: 3d09h
Incoming Interface List
Lmdtmvpn200 Flags: A LMI, Up: 3d09h
Outgoing Interface List
TenGigE0/0/0/0.200 Flags: F NS LI, Up: 3d09h
enable multicast route statistic
Config
ipv4 access-list mcast-counter
10 permit ipv4 host 200.2.2.2 232.0.0.0/24
!
hw-module route-stats l3mcast vrf mvpn200 ipv4 ingress mcast-counter
end
Verify
RP/0/RP0/CPU0:NC55A2-02#show mfib vrf mvpn200 route rate
Tue Aug 9 02:11:52.553 UTC
IP Multicast Forwarding Rates
(Source Address, Group Address)
Incoming rate:
Node: (Incoming node) : pps/bps
Outgoing rate:
Node: (Outgoing node) : pps/bps
(200.2.2.2,232.0.0.3)
Incoming rate :
Node : 0/0/CPU0 : 1 / 20862 <<<<<<<
Outgoing rate : MDT
RP/0/RP0/CPU0:NC55A2-01#show mfib vrf mvpn200 route rate
Tue Aug 9 02:49:02.700 UTC
IP Multicast Forwarding Rates
(Source Address, Group Address)
Incoming rate:
Node: (Incoming node) : pps/bps
Outgoing rate:
Node: (Outgoing node) : pps/bps
(200.2.2.2,230.0.0.3)
Incoming rate : MDT
Outgoing rate :
(200.2.2.2,232.0.0.3)
Incoming rate : MDT
Node : 0/0/CPU0 : 1 / 20862 <<<<<
Outgoing rate :
Limitation
No comments
Comments feed for this article